00:06Takeoff clips have to be used for removal. Red and blue takeoff clips are used with a red

00:12and blue frame.

00:13Yellow takeoff clips are used with a yellow frame.

00:20A few things to remember when removing a connector are the yellow booster is never used

00:25for removal. The blue booster removes yellow connectors and

00:30the red booster removes blue and red connectors.

00:35When installing either takeoff clip, the high side should be against the ram

00:44yellow installation start near the lance and slide back towards ra M.

00:53When you install it is open side of the frame to open side of the connector for

00:59removal, it is open side of the frame to closed side of the connector

01:18with the yellow frame. The yellow wedge is held with the yellow stop

01:22of the frame, make sure the takeoff clip is lined up with the C member

01:33with the blue and red frame. A blue wedge is held with the blue stop while

01:38the red wedge is held with the red stop.

01:50For more detailed instructions, refer to the table of contents and the safety operating and

01:55maintenance instructions.