00:07With the higher output. And the fact that we're able to be a bit more

00:10intelligent where we put the light, we're able to do lighting designs where there's actually a

00:14fewer fittings on a site.

00:16So fewer fittings obviously means less cost lumina wise,

00:20but also installation time is reduced and inspection time.

00:24So that over the life of the product, you're actually making a saving rather than just at

00:28initial lightly with the new product, we're actually achieving the light output of a

00:32traditional two by 58 watt fluorescent fitting and that is being achieved in the same size of

00:38fitting as we're using for the sort of 4 ft and the 2 ft equivalent.

00:42And that is a fitting a fitting that's actually less than 2 ft long.

00:45So along with the efficiency of led S and the optics, we're able to achieve the throw and

00:51output of these longer larger um fittings in a 2 ft fitting

00:57essentially. So after um feedback from customers during our

01:02VOC phase and also in house um feedback, we have decided to remove the led

01:09s um completely from the gear uh section of the lumina.

01:13So they're completely separate. It means that when someone is installing the

01:17fitting or maintaining it in any way, you don't need to remove a diffuser,

01:20then remove a gear tray. Um Potentially un wii it to remove it

01:25completely out of the way if it's hanging awkwardly, um,

01:27you can remove the front access pan. You've got direct access to the terminal block.

01:31So installation, it's just one access panel wire to the terminal block and close that

01:35access pan.