00:00Hi, my name is Matt Winer.

00:02I'm a sales engineer here at Hypertonic Hypertonic.

00:06We develop high voltage testing solutions today, I'm gonna show you how to test the te power

00:12brought to us by circuit breaker sales in our east.

00:16We're gonna be testing it using the 100 HPT dia C I come with me and I'll show you how to make

00:22the connections. First. Let's set up our grounds,

00:26connect the ground cable to the stud on the front panel of the controller.

00:38Remember ground is always the first connection made in the last removed for this test.

00:43We are also going to ground the lower stud of the breaker.

00:47No. Next let's connect our leakage current

00:52measurement cable. This cable with the red collar is our leakage

00:55current measurement cable.

01:02The other end of this cable is gonna go to our dut or device under test.

01:10We have it here connected to the lower stud of the breaker.

01:16Our next connection is going to be our voltage measurement.

01:20We're gonna plug it in here.

01:26The other end of this table is gonna go to the base of the bonnet where it says VM.

01:37Next let's connect RHV PRO.

01:41You'll see here.

01:43This hook looks right on to the top termination.

01:46And the other end B and C see the connect where it says BM PRO.

01:52So next we're gonna connect to our interconnect cable.

02:00This ca this cable right here and lock it in.

02:08This cable is made up of two parts, this larger cable which applies power to the transformer

02:13and this B and C cable, this larger cable is gonna connect to the cable,

02:19pull you off from our high level transformer.

02:31The other end, this B and C next at the base of the high the transformer,

02:36the cola RT N.

02:42Now we're ready to connect arrival the transformer to our dut for this breaker.

02:48We're gonna be using conductive rod to bring the high voltage from the transformer to the

02:53upper stud of the open breaker.

03:01Let's use our safety strobe light.

03:09Now let's plug in the unit and start our test.

03:21Let's this in automatic mode.

03:24Once you have selected automatic mode, you will see parameters for over voltage over current.

03:30The type of tests we're gonna be doing and the test procedure since we'll only be doing one

03:35step in this test, let's get rid of steps two and three.

03:39Now let's set up our over voltage and over current, our over volt is set to 100 KV and our

03:44over current is set to its max setting.

03:48Now let's set up our procedure.

03:52We're going at 500 volts per second or 0.5 KV per second to reach

03:59our manufacturer recommended test voltage of 36 KV and will dwell

04:08for five seconds.

04:10Once we have that we're ready to start is asking us,

04:16would we like to create a new preset with the current parameters for this test?

04:21Let's not create a new one watch as the test begins, our high voltage Shay Strobe has turned

04:28red to alert all people in the area that we are testing at high voltage.

04:35The automatic mode carries out the test for us.

04:39We can see the meters that our voltage is ramping steadily and our current is holding

04:46from this screen. We also see what step of the of the procedure

04:49we're in our max settings and a real time measurement of the resistance

04:57by clicking on these screens. We can change the the view from an analog meter

05:02design to a digital meter design.

05:05Note this blue bar tracks our progress

05:57notice when we, when we reach our mac setting, our timer kicked in for a five second dwell

06:04time. Once the test is finished, we get a noticing

06:10our test complete from here, we can save or save and export.

06:15Let's save and exit out to view our

06:21report to go back to the home and click reports.

06:27You'll notice here we have our test complete test mode is an automatic and the date and time.

06:33What select of you?

06:35Here's our test in a graphic format.

06:38If we wanted to, we can now export this test. People watching this demonstration of the 100

06:43HB CD I for testing vacuum records.

06:46For more information, visit our website hypos.com, send us an email at sales at

06:51hypertonic.com.