Anchor, Adapter, SS175 Tripleye
Marque: CHANCE Utility
No de catalogue: T1100465
SS175 Guy Adapter with Tripleye configuration. Bolt and nut assembled to adapter.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section (sold separately), Extension Shaft (sold separately), and the Guy Adapter.
- Guy adapters include a high-strength bolt and nut.
- Forged fittings on both ends of adapters
- Forged integral Pulling Eye speeds up guy installation
- Hot dipped galvanized per ASTM A153
Général
Application
Helical Anchoring
Catalog Number
T1100465
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength. Note: Pulling Eye Rated: 12,000 lbs. Guy wire should not be attached to pulling eye.
Résistance à la traction
100000 lb.
Type
Adapters
Type d'écrou à 'illet
Tripleye
Type de matériel
Standard
Type de produit
Guy Adapters
UPC
096359055617
Dimensions
Dimensions
18.000 po x 6.330 po x 3.000 po
Hauteur
3 in
Largeur
6.33 in
Longueur
18 in
Poids
10.78 lb
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength. Note: Pulling Eye Rated: 12,000 lbs. Guy wire should not be attached to pulling eye.
Résistance à la traction
100000 lb.
Logistique
Emballage standard
1
Nombre d'unités sur la palette
160