Anchor, PISA Nut 1in threads Tripleye
Marque: CHANCE Utility
No de catalogue: 12585
Tripleye eyenut configuration for 0.75" (19.1 mm) & 1" (25.4 mm) Pisa Anchor Rod
Chance PISA eyenuts are designed to be used Chance PISA screw anchors. The eyenuts with 5/8" diameter threads are used with 5/8" diameter rods. The eyenuts with 1" threads are used with; 3/4" and 1" diameter rods. Rods are galvanized in accordance with ASTM A153. Eyenuts are availale in three configurations to be used with one, two or three guy wires.
- For use with Pisa style anchor rods
- Eyes are dropped forged for better strength and reliability
- Hot dipped galvanized per ASTM A153
Général
Application
Helical Anchoring
Catalog Number
12585
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
- 23000 lb.
- 36000 lb.
Type
Power Installed Screw Anchor (PISA)
Type d'écrou à 'illet
Tripleye
Type de matériel
Standard
UPC
096359068396
Dimensions
Diamètre de la tige
- 0.75
- 1 in
Dimensions
3.750 po x 2.875 po x 1.875 po
Hauteur
1.875 in
Largeur
2.875 in
Longueur
3.75 in
Poids
2.058 lb
Certifications et conformité
Achetez des produits qualifiés aux États-Unis
BABA Compliant (All status valid till December 2026)
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
- 23000 lb.
- 36000 lb.
Logistique
Emballage standard
25
Nombre d'unités sur la palette
960