Anchor, PISA Rod, 3/4in X 3.5ft, 1in threads
Marque: CHANCE Utility
No de catalogue: 12634P
Pisa anchor rod 0.75" (19.1 mm) diameter, 3' 6" (1067 mm) long. Eyenut not included.
Chance PISA rods are designed to be used with Tough One and PISA screw anchors. Both ends have a forged hex to allow the rod to be tightened to the anchor and the eyenut. The 5/8" diameter rods have 5/8" diameter threads; 3/4" and 1" diameter rods have 1" threads. Anchors and eyenuts have either 5/8" threads or 1" threads. Rods are galvanized in accordance with ASTM A153. Anchor rods are available without the eyenut or with various styles of eyenuts assembled to the rod at the factory.
- Hot forged hex collar provides strong connection to anchor and eye
- Hot dipped galvanized per ASTM A153
- Rods used with PISA® Power Installed Screw Anchors
- Cannot be used with Expanding and Plate Anchors
Général
Application
Helical Anchoring
Catalog Number
12634P
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
23000 lb.
Type
Power Installed Screw Anchor (PISA)
Type de matériel
Standard
Type de produit
Anchor Rod
UPC
096359068457
Dimensions
Diamètre de la tige
0.75 in
Dimensions
42.000 po x 1.400 po x 1.400 po
Hauteur
1.4 in
Largeur
1.4 in
Longueur
42 in
Poids
5.88 lb
Certifications et conformité
Achetez des produits qualifiés aux États-Unis
BABA Compliant (All status valid till December 2026)
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
23000 lb.
Logistique
Emballage standard
5
Nombre d'unités sur la palette
50