Anchor, Extension Shaft, feet long, SS150, X 7 feet long
Brand: Chance
Catalog ID: C1100389
Square Shaft (SS 150) Extension 7' (2134 mm). Bolt and nut assembled to extension.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section (sold separately), Extension Shaft, and the Guy Adapter (sold separately).
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
- Bolt and nut are assembled to extension at the factory
General
Application
Helical Anchoring
Catalog Number
C1100389
Coating
Galvanized, ASTM A-153
Material Type
Non-Standard
Number of Helices
0
Product Family
SS150
Product Type
Anchor Extension
Shaft Type
Square Shaft
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
- 70000 lb.
- 70000 lb.
Torque Rating
7000 ft-lbs
Type
Anchor Extensions
UPC
096359009757
Dimensions
Dimensions
84 in x 3 in x 2.5 in
Height
2.5 in
Length
84 in
Weight
54.145 lb
Width
3 in
Certifications And Compliance
Buy America(n) Qualified
Buy American Act Compliant (All status valid till December 2026)
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
- 70000 lb.
- 70000 lb.
Configuration
Number of Helices
0
Logistics
Pallet Quantity
24
Standard Package
1