Anchor, Extension Shaft, feet long, SS5, 10 X 5 feet long
Brand: Chance
Catalog ID: 12656E
Square Shaft (SS 5) Extension 5' long (1524 mm) with 10" (254 mm) Helix. Bolt and nut assembled to extension.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section (sold separately), Extension Shaft, and the Guy Adapter (sold separately).
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
- Bolt and nut are assembled to extension at the factory
General
Application
Helical Anchoring
Catalog Number
12656E
Coating
Galvanized, ASTM A-153
Number of Helices
1
Product Family
SS5
Product Type
Anchor Extension
Shaft Type
Square Shaft
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
- 70000 lb.
- 70000 lb.
Torque Rating
5500 ft-lbs
Type
Anchor Extensions
Dimensions
Anchor Helix Diameter(s)
10 in
Dimensions
60 in x 10 in x 10 in
Height
10 in
Length
60 in
Width
10 in
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
- 70000 lb.
- 70000 lb.
Configuration
Number of Helices
1
Logistics
Standard Package
1