Anchor, Lead Section, SS150 8/10 X 3 feet Rock-It
Brand: Chance
Catalog ID: C1101291
Rock-It (SS 150) Lead Section, 3' (914 mm) long with 8" (203 mm) - 10" (254 mm) Helices.
The ROCK-IT™ lead section by Hubbell Power Systems is an innovative solution to help penetrate thin rocky layers without pre-drilling. The single carbide tip design was developed after site testing of several rock anchor configurations to provide an economical, yet proven solution to reach load-bearing depths.
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
General
Application
Helical Anchoring
Catalog Number
C1101291
Coating
Galvanized, ASTM A-153
Number of Helices
2
Product Type
SS150
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
70000 lb.
Torque Rating
7000 ft-lbs
Type
Lead Sections
UPC
096359625704
Dimensions
Anchor Helix Diameter(s)
8 in - 10 in
Dimensions
36.000 in x 10.000 in x 10.000 in
Height
10 in
Length
36 in
Weight
14.865 lb
Width
10 in
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
70000 lb.
Configuration
Number of Helices
2
Logistics
Standard Package
1