Anchor, Lead Section, SS150, 8/10/12/14 X 10ft
Brand: Chance
Catalog ID: T1100521
Square Shaft (SS 150) Lead Section, 10' 6" (3200 mm) long with 8" (203 mm) - 10" (254 mm) - 12" (304 mm) - 14" (355 mm) Helices.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section, Extension Shaft (sold separately), and the Guy Adapter (sold separately).
- Finish: Galvanized
- Capacity of helical pile can be determined by measuring installation
General
Application
Helical Anchoring
Catalog Number
T1100521
Coating
Galvanized
Finish Type
Galvanized
Material Type
Non-Standard
Number of Helices
4
Product Family
SS150
Product Type
Square Shaft Lead
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
70000 lb.
Torque Rating
7000 ft-lbs
Type
Lead Sections
UPC
096359055648
Dimensions
Anchor Helix Diameter(s)
8 in - 10 in - 12 in - 14 in
Depth
14 in
Dimensions
120.00 in x 14.00 in x 14.00 in
Height
14 in
Length
120 in
Weight
126.66 lb
Width
14 in
Certifications And Compliance
Building Code Evaluated
No
Buy America(n) Qualified
Contact Manufacturer
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
70000 lb.
Configuration
Number of Helices
4
Logistics
Pallet Quantity
12
Standard Package
1