Anchor, Lead Section, SS200 10/12 X 6 feet
Brand: Chance
Catalog ID: C1101256
Square Shaft (SS 200) Lead Section 6' (1829 mm) long with 10" (254 mm) - 12" (304 mm) Helices
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section, Extension Shaft (sold separately), and the Guy Adapter (sold separately).
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
General
Application
Helical Anchoring
Catalog Number
C1101256
Coating
Galvanized, ASTM A-153
Number of Helices
2
Product Type
SS200
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
150000 lb.
Torque Rating
16000 ft-lbs
Type
Lead Sections
UPC
096359617495
Dimensions
Anchor Helix Diameter(s)
10 in - 12 in
Dimensions
72.000 in x 12.000 in x 12.000 in
Height
12 in
Length
72 in
Weight
103.167 lb
Width
12 in
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
150000 lb.
Configuration
Number of Helices
2
Logistics
Standard Package
1