Anchor, Lead/Adapter, SS5, 8/10 X 3ft Twineye
Brand: Chance
Catalog ID: 126542AE
Square Shaft (SS 5) Lead Section, 3' (914 mm) long with 8" (203 mm) - 10" (254 mm) Helices with Guy Adapter Twineye in separate box.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section, Extension Shaft (sold separately), and the Guy Adapter.
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
General
Application
Helical Anchoring
Catalog Number
126542AE
Coating
Galvanized, ASTM A-153
Eyenut Style
Twineye
Material Type
Non-Standard
Number of Helices
2
Product Type
SS5 with Guy Adapter
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength. Note: Pulling Eye Rated: 12,000 lbs. Guy wire should not be attached to pulling eye.
Tensile Strength
70000 lb.
Torque Rating
5500 ft-lbs
Type
Lead Sections
UPC
096359068488
Dimensions
Anchor Helix Diameter(s)
8 in - 10 in
Dimensions
36.000 in x 10.000 in x 10.000 in
Height
10 in
Length
36 in
Weight
90.65 lb
Width
10 in
Certifications And Compliance
Buy America(n) Qualified
TAA Compliant (All status valid till December 2026)
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength. Note: Pulling Eye Rated: 12,000 lbs. Guy wire should not be attached to pulling eye.
Tensile Strength
70000 lb.
Configuration
Number of Helices
2
Logistics
Standard Package
1