PDV-65 Optima Arrester (24.4 kV MCOV, 7333 Hardware)
Brand: OHIO BRASS
Catalog ID: 2132747333
IEEE Normal Duty Class / IEC Distribution Medium / High Quality Polymer Housed Surge Arrester
- Over 35 years of excellent field performance with over 40 million distribution arresters installed
- Long lasting ESPTM housing material with superior mechanical strength and electrical characteristics
- Reliable capacitive disconnector operates at fault currents as low as 1 Amp
- Dynamic triple sealing system protects internal components from moisture ingress to extend service lifetime
- High quality MOV discs made in Wadsworth, Ohio since 1978
- Arresters assembled in Aiken, South Carolina
- 100% routine tested
General
Application
Distribution
Bracket Type
Transformer Bracket
Cantilever Bending Strength - Max.
45 Nm
Catalog Number
2132747333
Color
Gray Housing
Material
ESP™ Polymer Housing
Mounting Position
Upright
Product Type
Normal Duty
Type
Distribution
UPC
096359867180
Dimensions
Depth
3.63 in
Height
17.44 in
Minimum Mounting Spacing on Center (Sea Level) - Phase to
11.8 in (299.72 mm)
Minimum Mounting Spacing on Center (Sea Level)- Phase to Phase
13.6 in (345.44 mm)
Stud Type
3/8-16
Width
8.57 in
Electrical Ratings
Creep and Leakage Distance
41 in (1039 mm)
Current - Low Current Long Duration (LCLD) Test
75 A
Duty Cycle
30 kV
Frequency Rating
48-62 Hz
Maximum .5 Microsecond Discharge Volts @ Classifying Current
99.5 kV
Maximum Discharge Voltage
- 78.7 kV @ 1.5 kA
- 83.8 kV @ 3 kA
- 89.3 kV @ 5 kA
- 100.6 kV @ 10 kA
- 116.2 kV @ 20 kA
- 145.2 kV @ 40 kA
Maximum Switching Surge Protective Level @ 500A
70.4 kV
MCOV
24.4 kV
Minimum Strike
15 in
Pressure Relief Capability-Symmetrical rms (kA)
15
Time - Low Current Long Duration (LCLD) Test
2000 µs
Withstand Voltage - 60 Hz Wet
82
Withstand Voltage - Lightning Impulse
230
Withstand Voltage - Switching Impulse
76.1
Force Related
Cantilever Bending Strength - Max.
45 Nm
Configuration
Bracket Type
Transformer Bracket
Mounting Position
Upright