Rod, Expanding/Cross-Plate Anchor 3/4in X 8ft Thimbleye
Brand: Chance
Catalog ID: C2000090
Expanding/Cross-Plate Anchor Rod 0.75" (19.1 mm) Diameter Rod, 8' (2438 mm) long with Thimbleye with protective plastic tube.
Anchor rods used with Expanding and Cross-plate anchors are available for one, two, or three guys. Thimbleye, Twineye and Tripleye eye design distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. The drop-forged eye of each anchor rod is stronger than the rod itself. Rod length and diameter are stamped below each rod eye. Each rod is threaded 3-1/2" minimum length. Heave square nut included.
- Thimbleye®, Twineye® and Tripleye® drop forged eye distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending.
- Hot dipped galvanized per ASTM A153, plastic tube assembled on rod
- Square nut assembled to rod
- Rods used with Cross-plate and Expanding anchors
General
Application
Earth Tension Anchoring
Catalog Number
C2000090
Coating
Galvanized, ASTM A-153 with Plastic Tube
Eyenut Style
Thimbleye
Material Type
Non-Standard
Product Type
Expanding, Cross Plate Anchor Rod Protected
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
23000 lb.
Type
Anchor Rod
UPC
096359012559
Dimensions
Dimensions
96.000 in x 1.625 in x 1.500 in
Height
1.5 in
Length
96 in
Rod Diameter
0.75 in
Weight
11.917 lb
Width
1.625 in
Certifications And Compliance
Buy America(n) Qualified
Contact Manufacturer
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
23000 lb.
Logistics
Pallet Quantity
50
Standard Package
5