Terminal, Aluminum Compression
Brand: ANDERSON
Catalog ID: CCLS563B
Aluminum cast, compression terminal for connecting aluminum cable to flat pad. Connector barrel is filled with rubber compatible sealant and enclosed in clear plastic bag. Contact sealant is recommended on the pads. Pad holes have NEMA spacing. Pads have contact surface on both sides. Short barrel requires less space and allows faster installation. For use with VERSA CRIMP® tooling through CCLS1300 (Die Ref. 1.844) and conventional compression tooling. Refer to Chart C-13282 on page A-34 for tool and die information. Material: casting - 99 aluminum alloy.
- "15°, 45° & 90° angle connectors may be obtained by specifying desired angle
- Additional CCLS sizes available up to 1.824”"
General
Catalog Number
CCLS563B
Material
Aluminum
Material Type
Standard
Number of Ground Braid Lug Holes
0
Number of Pad Holes
2
Product Type
Short Barrel
Type
Terminal, Cable to Flat
UPC
096359297994
Dimensions
Angle - Pad
180 °
Base Hole Spacing
0 in
Diameter - Base Holes
0 in
Diameter - Bolt
0 in
Diameter - Inside
0 in
Length - Coupling
0 in
Length Before Compression
0 in
Weight
0.392 lb
Width - Pad
1.5 in
Electrical Ratings
Maximum Current Rating Amps Continuous
0
Conductor Related
Conductor Compatibility
ACSR-Pigeon-3/0-6/1;ACSR-Penguin-4/0-6/1;AAC-Oxlip-4/0-7
Conductor Diameter - Maximum
0.563 in
Conductor Diameter - Minimum
0.502 in
Conductor Diameter Range
0.502 - 0.563
Conductor Type
- AAC
- ACSR
Certifications And Compliance
Buy America(n) Qualified
Contact Manufacturer
Configuration
Number of Bolt Holes
2
Number of Ground Braid Lug Holes
0
Number of Pad Holes
2