Terminal, Aluminum Weldment
Brand: ANDERSON
Catalog ID: W2CF129D
Aluminum alloy weldment terminal for connecting two aluminum cables to aluminum or coppr flat pad. Tongue holes have NEMA spacing. Contact sealant is recommended for contact pad after welding. Cable should be positioned 1/8" to 3/16" from edge inside barrel prior to puddle welding. For use with any stranding Aluminum conductor. 45 deg and 90 deg angle connectors may be obtained by adding the desired angle to the end of the catalog number. Material: casting - 356-F aluminum alloy.
- Tongue holes have NEMA spacing. Contact sealant is recommended for contact pad after welding
- Cable should be positioned 1/8" to 3/16" from edge inside barrel prior to puddle welding
- For use with any stranding Aluminum conductor
- 45 deg and 90 deg angle connectors may be obtained by adding the desired angle to the end of the catalog number.
General
Catalog Number
W2CF129D
Material
Aluminum
Material Type
Non-Standard
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Type
Terminal, Aluminum Weldment
UPC
096359353126
Dimensions
Angle - Pad
180 °
Base Hole Spacing
0 in
Diameter - Base Holes
0 in
Diameter - Bolt
0 in
Diameter - Inside
0 in
Length - Coupling
0 in
Length Before Compression
0 in
Weight
2.646 lb
Width - Pad
4 in
Electrical Ratings
Maximum Current Rating Amps Continuous
0
Conductor Related
Conductor Compatibility
ACSR-Ortolan-1033.5-45/7;ACSR-Curlew-1033.5-54/7;AAC-Marigold-1113-61
Conductor Diameter - Maximum
1.245 in
Conductor Diameter - Minimum
1.209 in
Conductor Diameter Range
1.209 - 1.245
Conductor Type
- AAC
- ACSR
Certifications And Compliance
Buy America(n) Qualified
Contact Manufacturer
Configuration
Number of Bolt Holes
4
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4