Terminal, Aluminum Weldment
*Representative image
+2
Terminal, Aluminum Weldment
Brand: ANDERSON
Catalog ID: WCF103B2
Aluminum alloy weldment terminal for connecting aluminum cable to aluminum copper flat pad. Tongue holes have NEMA spacing. Contact sealant is recommended for contact pad after welding. Cable should be positioned 1/8" to 3/16" from edge inside barrel prior to uddle welding. For use with any stranding aluminum conductor. 45 deg and 90 deg angle connectors may be obtained by specifying the desired angle at the end of the catalog number. Material: castings - 356-F aluminum alloy.
- Tongue holes have NEMA spacing. Contact sealant is recommended for contact pad after welding
- Cable should be positioned 1/8" to 3/16" from edge inside barrel prior to uddle welding
- For use with any stranding aluminum conductor
- 45 deg and 90 deg angle connectors may be obtained by specifying the desired angle at the end of the catalog number.
General
Catalog Number
WCF103B2
Material
Aluminum
Material Type
Non-Standard
Number of Ground Braid Lug Holes
0
Number of Pad Holes
2
Type
Terminal, Aluminum Weldment
Dimensions
Angle - Pad
180 °
Base Hole Spacing
0 in
Diameter - Base Holes
0 in
Diameter - Bolt
0 in
Diameter - Inside
0 in
Length - Coupling
0 in
Length Before Compression
0 in
Weight
0.8 lb
Width - Pad
2 in
Electrical Ratings
Maximum Current Rating Amps Continuous
0
Conductor Related
Conductor Compatibility
ACSR-Squab-605-26/7;ACSR-Rook-636-24/7;AAC-Flag-700-61;AAC-Violet-715.5-37;AAC-Nasturtium-715.5-61
Conductor Diameter - Maximum
0.977 in
Conductor Diameter - Minimum
0.963 in
Conductor Diameter Range
0.963 - 0.977
Conductor Type
- AAC
- ACSR
Configuration
Number of Bolt Holes
2
Number of Ground Braid Lug Holes
0
Number of Pad Holes
2