Terminal, Aluminum Weldment
Brand: ANDERSON
Catalog ID: WCF123C
Aluminum alloy weldment terminal for connecting aluminum cable to aluminum copper flat pad. Tongue holes have NEMA spacing. Contact sealant is recommended for contact pad after welding. Cable should be positioned 1/8" to 3/16" from edge inside barrel prior to uddle welding. For use with any stranding aluminum conductor. 45 deg and 90 deg angle connectors may be obtained by specifying the desired angle at the end of the catalog number. Material: castings - 356-F aluminum alloy.
- Tongue holes have NEMA spacing. Contact sealant is recommended for contact pad after welding
- Cable should be positioned 1/8" to 3/16" from edge inside barrel prior to uddle welding
- For use with any stranding aluminum conductor
- 45 deg and 90 deg angle connectors may be obtained by specifying the desired angle at the end of the catalog number.
General
Catalog Number
WCF123C
Material
Aluminum
Material Type
Non-Standard
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Type
Terminal, Aluminum Weldment
UPC
096359340478
Dimensions
Angle - Pad
180 °
Base Hole Spacing
0 in
Diameter - Base Holes
0 in
Diameter - Bolt
0 in
Diameter - Inside
0 in
Length - Coupling
0 in
Length Before Compression
0 in
Weight
0.98 lb
Width - Pad
3 in
Electrical Ratings
Maximum Current Rating Amps Continuous
0
Conductor Related
Conductor Compatibility
ACSR-Mallard-795-30/19;ACSR-Canary-900-54/7;ACSR-Rail-954-45/7;AAC-Camellia-1000-61;AAC-Bluebell-1033.5-37;AAC-Larkspur-1033.5-61
Conductor Diameter - Maximum
1.172 in
Conductor Diameter - Minimum
1.14 in
Conductor Diameter Range
1.14 - 1.172
Conductor Type
- AAC
- ACSR
Certifications And Compliance
Buy America(n) Qualified
Contact Manufacturer
Configuration
Number of Bolt Holes
4
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Logistics
Pallet Quantity
960