00:04Kristen riggs here with the Hubble. How two today,

00:06I'd like to talk to you about Reo's line of Liquid type connectors and compare it to its

00:10competition. Rego offers connectors in both straight and 90

00:14degrees in trade sizes, 3/8 of an inch through four inches and 45 degrees in trade sizes.

00:203/8 of an inch through two inches, diecast Z connectors are also available in both straight

00:26and 90 degrees in trade sizes. 3/8 of an inch through four inches,

00:31liquid type connectors are uniquely designed to address and eliminate common shortcomings of

00:36other brands. Rao's exclusive design reduces installation

00:40time and provides reliable service. All components are made of premium materials

00:45that fit perfectly without strain or distortion and can be disassembled after years of service

00:51with all parts completely reusable.

00:54Rico's liquid type nut is constructed of malleable iron with a continuous thread.

01:00The competitions is form steel and does not have a continuous thread.

01:07Ferals have a longer design which ensures ground path continuity and they are easier to

01:13thread onto the conduit than the competitions breakup.

01:17Provides a ceiling washer with every connector while the competition requires the washer be

01:22purchased separately.

01:25Rico's patented split Gland ring has many advantages over the one piece type used on

01:30other liquid type fittings.

01:32It is flexible, easy to use and remove and is reusable.

01:38It is also forgiving to the installer because it is reversible,

01:41which eliminates the chance of installing it backwards.

01:44And because it is split, our Gland ring can be installed before or after the grounding fal.

01:53The competition's ring is not flexible and requires extra attention to install around the

02:00conduit. Because of the design, the Glander is deformed

02:04during application and must be cut off in order to remove the fitting rao

02:11split. Gland ring is the key to maximum compression

02:14forts that prevents pull outs. Our patented Glander has a slight gap when

02:18placed on the conduit. This split allows maximum compression of the

02:22Glander which will abide to the high and low side of tolerance used by the manufacturers of

02:27liquid type conduit.

02:28When the connector is tightened, the gap in the Glander is completely closed and the concave

02:32inner surfaces cause the PV C jacket material to cold flow and ensure maximum retention of

02:38the fitting. The convex outer surface is forced into the

02:42flared portion of the grounding feral by tightening the compression nut,

02:45sealing the conduit and the inner portions from the outside environment.

02:49Both conduit and jacket are locked in the connector.

02:52Whereas many competitors rely on the ferrel for retention.

02:55And in many cases, the jacket pulls free of the connector and ruins.

02:58The liquid seal.

03:01Rao's liquid type connectors are the reliable solution for keeping water,

03:05oil and dust out of electrical systems. Even in the toughest of applications.

03:10For more information on these and other fine Rego products.

03:13Please visit our website. I'm Kristen Riggs and that was a Hubble.

03:16How to?