00:05Hubbell. The market leader in electrical boxes has added

00:09the STAB-iT II series of 4-11/16 square boxes. This expands our existing line of STAB-iT boxes

00:15which is already preferred by professionals for its built in connectors which offer a three

00:19times faster install for flexible armored cable. Of course,

00:23the larger 4-11/16 opening offers more capacity than the 4 inch model for situations with

00:29bigger cables, multiple conductors, larger devices or whenever the larger opening is just

00:34preferred just like the original STAB-iT.

00:36The STAB-iT includes our unique built in connectors, but we've offered a few more

00:41enhancements for more options for time and labor savings.

00:44First off each STAB-iT box handles three cables instead of two and the connector handles larger

00:49cables than before plus STAB-iT II connectors now include individual release screws providing

00:56added convenience if any one cable needs to be removed.

00:59And the boxes include our TKO an eccentric knockout for either half inch or three quarter

01:04inch on the same side as the cable connector.

01:07Another helpful feature are the bracket options like the M bracket,

01:11which is designed with a three inch deep offset allowing for quick and easy face mounting from

01:16either side, which is especially useful between narrow stud openings or the CM or cable

01:21management bracket, which provides a quick means of securing the cable at the box entry

01:26for the National Electric code. Today, we'll walk through a typical install of

01:30the 252 MSCM and I'll show you a few of the STAB-iT II features in action as well as

01:36demonstrate the time saving benefit of the entire STAB-iT line.

01:39We're here in a new work environment. There are some one gang STAB-iT switch boxes

01:43designed for old work. If your job is a remodel or similar situation

01:47as with any electrical work, make sure the power is off at the breaker for this install.

01:52We're using 14 3 and 10 3 MC cable. Start by fastening the bracket to the metal

01:58stud and then remove the necessary tryouts with the cable already stripped,

02:02run the loose wires into the box through the open tryout,

02:05pushing until you feel it lock into place.

02:08I'll do the same for other cables in the event that something changes and you need to remove a

02:13cable simply loosen the connector screw and the cable will release the 252 SCM includes the

02:19handy cable management clip. So I'll attach the cable which provides the

02:23first means of support for the MC cable and that's all there is to it efficiently installed

02:28in under a minute compared to 2 to 3 minutes using traditional methods.

02:32In addition to this 252 MSCM box, the STAB-iT two series includes these five other four and

02:3811/16 boxes. All part of the Hubble STAB-iT line which

02:42includes 23 box options to reduce the time and labor on almost any job.

02:47So if you want to save time and reduce clutter on your next project,

02:51ask for Hubbell, STAB-iT and STAB-iT II boxes.

02:54And remember for any of your commercial and industrial or residential projects.

02:58Look to Hubbell for proven and trusted solutions.