00:06Introducing the Hubbell Twist-Lock Edge Spring Termination, locking receptacles from Hubbell

00:12spring termination receptacles deliver a revolutionary improvement over screw

00:16receptacles that can help you reduce wiring installation time by upwards of 80% with spring

00:22termination receptacles, technicians can complete the installation completely by hand

00:27without a screwdriver or torque wrench. With this new termination method.

00:30The NEC guidelines for requiring the use of a torque driver to secure the terminations is no

00:35longer required. It's an ergonomic solution that not only saves

00:39time but significantly reduces wrist strain as well.

00:42Furthermore wires stay tight for the long term, regardless of vibration or temperature cycling

00:47or strand relaxation, you won't have to go back and re tighten just install once and you're all

00:52set. And since there is no exposed metal on the

00:55receptacle, you can even place more of them closer together as needed.

00:59Just how much time can you save? Studies show that the average time required by

01:04a professional installer to complete a screw termination is one minute and eight seconds.

01:08With the Hubbell twist lock spring termination system.

01:11A professional installer can complete the process in as little as 11 seconds.

01:16So how does it work.

01:18Let's take a look at a single phase receptacle installation.

01:21Each unit's red plungers are shipped in the opposition for even greater installation speed

01:27simply insert each wire into its adjacent compartment as the wire enters the spring

01:32mechanism in the bottom of the compartment, press the red plunger back down to engage the

01:36spring for a secure tight permanent termination with no tools.

01:40That's all there is to it do the same with the other wires and all are secure for the long

01:45term. The screw termination takes more than six times

01:49longer. If you're doing dozens or hundreds of

01:51installations, what could you do with all that extra time?

01:55If you have a need to uninstall? A device removal is just as fast and easy.

01:59Simply lift the plunger with any convenient edge tool and lift the wires straight out the

02:04complete line of Hubbell, twist lock edge spring termination, locking receptacles will be a in

02:0934 and five wire versions with the latter featuring a pre installed ground wire.

02:14No matter what version meets the needs of the job, you will be installing receptacles faster

02:19and easier than ever before. For more information on the exclusive whole

02:23series of twist lock edge spring termination devices, visit www.yulquexornem.shop/wiringdevice-kellems/en